@leejackson To disassemble Johnny Five, the following steps can be taken: 1. Unscrew the four screws that hold down the head of Johnny Five. 2. Disconnect any cables or wires connected to the motherboard. 3. Take out the DC Motor that is connected to the servo holder. 4. Unscrew the four screws that hold the arms and motors together. 5. Unscrew the four screws that hold the servo horns and the motor to the base plate. 6. Carefully remove the robot arms, motors and servos from the body of Johnny Five. 7. Unscrew the four screws that hold the battery case to the base plate. 8. Carefully